How to Mount Power Strip to Wall [Beginner Guide]

A power strip is a great way to save time, money, and energy. It allows you to plug multiple devices into one outlet. They come in a variety of sizes and designs and are very handy for those who use them frequently or have a lot of gadgets at home.

However, there are many different ways to mount a power strip to a wall. Some people use screws while others use nails. Some use drywall screws and others use anchors. And some use a combination of two or more methods.

In this post, I’m going to go through the different methods of mounting a power strip to a wall.

General Things About Mounting A Power Strip

Some of the power strips have extension cords while others do not. They usually consist of a long cord that is plugged into the main supply and then connected to the socket at the end. The outlet has a switch with several slots to accommodate the plugs.

The power strip is a kind of multi-socket adapter that can be controlled by a switch. It also protects against power surges with an inbuilt circuit breaker.

But in most instances, they are required to be mounted on the walls. It makes the home more organized and allows you to have more outlets just beside the wall socket.

First, Select a Suitable Position for the Power Strip

Before you get to it, make sure you have selected the perfect position to mount the power strip. While selecting the position, keep these things in mind:

  • The power strip should be close to a wall socket.
  • The room should be at its optimum temperature. Too much heat can damage the strip and also cause energy loss.
  • The place should be dry. Make sure there is no water source around it. Any splash inside the socket can cause a short circuit.
  • Make sure the socket is not reachable by kids and pets.
  • The power strip should be close to the appliances.
  • You should be able to operate it easily.
  • Make sure the wall socket that it’s connected to has a circuit breaker.

How to Mount a Power Strip on the Wall? Step by step

In some cases, mounting a power strip can be a good solution. You can do it easily, just follow the simple steps given below:

What you’ll need to mount a power strip:

To properly mount your power strip, you need the following:

  • Screws (the right size and length depending on the wall)
  • A drill with a screwdriver bit
  • A power strip
  • A pencil
  • Masking Tape

Steps-

  • Step 1: Mark the spots where you will attach the screws. You can make marks with a pencil or any other marker. Make sure they are level with each other. To be more specific, the distance between the centers of the holes on the power strip should be equal to that of the screws.
  • Step 2: Put the power strip on the wall where you want to mount it. Hold it by holding the screws with one hand and pressing it against the wall with your other hand. Make sure it is level and mark where you will drill holes.
  • Step 3: Draw a line on the wall with your pencil where you will drill the holes for the screws.
  • Step 4: Drill the holes. Make sure that all the screws are drilled to the same depth.
  • Step 5: Mount the power strip to the wall and secure it with screws. Check whether it is properly fixed and tighten it.

Bonus Guide:

A Guide To Mounting A Power Strip On The Wall Without Using Nails

Another method is to mount a power strip without using nails. If you want to do this, you will need the following tools first.

  • 1 power strip
  • 4 zip ties
  • 1 hexagonal-headed screw
  • 1 plastic hook.

Below is the step-by-step guide:

  • Step 1: Prepare your power strip first. Detach it from the other parts and then zip-tie the cord into a loop to prevent it from retracting.
  • Step 2: Zip-tie the other end of the cord to one end of your screw as well. Make sure that it is mounted on the wall at the appropriate height. Use a pencil to mark where you will attach it to the wall first.
  • Step 3: Once you mark where you will attach the screw, poke a hole with your screwdriver bit to drill through. Make sure that it is not too small or too large. The hole should be just enough to accommodate your screw.
  • Step 4: Attach one end of another zip tie on the wall where you will attach the screw.
  • Step 5: Attach your plastic hook on top of it.
  • Step 6: Zip-tie your power strip to the plastic hook. Make sure that it is tight and in a straight line with the zip tie on the wall.
  • Step 7: Tighten both screws with your screwdriver.

This is how you can mount a power strip on the wall without using nails. The advantage of this method is that if you wish to move the power strip, you can easily unplug it and take it with you.

How to Mount a Power Strip to a Wall Without Screws?

This is our 3rd method to mount a power strip without using screws. Many people don’t want to drill to mount a power strip. For this, you need a wood or metal strip, a cable tie, and routed brackets.

Wood Or Metal Strip With A Cable Tie

To mount a power strip with a wooden or metal strip, make sure to follow the below steps:

You will need the following things:

  • Power strip
  • A wood/plywood/metal strip the size of the power strip
  • Cable tie
  • Command adhesive

Step by step:

  • Step 1: Take off your power strip from its packaging.
  • Step 2: Cut the wood or metal strip according to the size of the power strip.
  • Step 3: Make four holes to put through the cable ties. And now stick the wood strip to the wall using command adhesive.
  • Step 4: Put the power strip together with the wood strip using the cable ties. Make sure that the cable isn’t covering the outlets.
  • Step 5: That’s it. You’ve successfully mounted a power strip to the wall without using screws.

Routed Brackets:

You can mount your power strips on the wall by using molded or routed brackets. Take the wood or metal brackets and place them in such a manner like the end of the power strip. Make sure that they fit the power strip inside them perfectly.

A mobile on the wall mount power stip.

Mount a Power Strip Without Holes in the Wall

This is our 4th method of mounting a power strip on the wall. This method will allow you to mount a power strip without holes.

You only need double-sided tape or your preferred adhesive for this method. Simply put the tape or the adhesive over the wall so that the corners of the power strip fit perfectly over them.

Avoid These Things After Mounting A Power Strip On The Wall?

After you mount the power strip on the wall, there are some things you should avoid doing.

  • Do not attempt to move it frequently as this can cause the power strip to fall down, which is a fire hazard.
  • Do not overload the power strip, as this can also cause it to overheat.
  • If you have multiple extension cords, do not run them through one another, as this will restrict the performance of both devices and will create a huge mess.
  • Do not cover the power strip with a cloth or any other material, as this can lead to overheating.
  • Do not place a heavy object on top of the power strip.
  • Do not connect over ten devices to a single power strip, as this causes overheating and can cause damage to both extension cords and devices connected.
  • You should not use a power strip on the construction site or hospital.
  • When you mount a power strip on the wall, make sure you follow all the steps correctly to avoid any accidents.

Use Wall-mounted Power Strips

You can easily find wall-mounted surge protector power strips on the market. They will make your job a lot easier. It will save both your time and additional work. So, if you have already setup your mind to mounting your power strip on the wall, go for one which has a heavy-duty cord and surge protection feature.

wall mounted power strip

FAQs

How much does it cost to mount a power strip on the wall?

It depends on the type of power strip you buy. You can also mount a power strip without having to spend too much if you follow the above steps.

How high should I mount my power strip?

Mount your power strip at a height that is comfortable for you. You can mount it from waist to knee level or even higher, depending on how high your power strip’s cord can reach.

How many KLAPiTs should be used for hanging a power strip?

For hanging a power strip with KLAPiTs, you will need 1 KLAPiT for each power strip.

Is it safe to mount a surge protector on the wall?

Yes, it is safe to mount a surge protector/power strip on the wall. They’re designed to protect your devices from sudden power surges, so there’s no need to be concerned about their safety.

Where can I mount my power strip?

You can mount your power strip near your desk, behind your couch, or on your wall. Mostly, it depends on where you usually plug in your devices. Keep in mind that you should mount your power strip in a place where your baby or pets can’t reach it.

What kind of screw should I use?

You should use a screw that is small enough to be hidden by the cover of your power strip.

What if my power strip doesn’t have mounting slots?

If you cannot mount your power strip, you can use Velcro strips to mount it on the wall without screws. You can buy Velcro strips from any local hardware store.

In Conclusion

A power strip is an essential tool for your home. You can plug multiple devices into your power strip at the same time. To properly use it in your home or other places, you can follow the above method to mount it on a wall with or without screws.

I hope you got the answer on how to mount the power strip to the wall. You can also check our recommended pieces of advice after you mount your power strip. Finally, don’t forget to mount your power strip in the proper place.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.