I can tell you that the Braeburn series by Honeywell is one of the best on the market. It’s so good that many people don’t realize they have an old-fashioned mercury thermometer in their home! But with a simple installation step and some time to get used to your new thermostat. You’ll be amazed at how much more comfortable and efficient your home will feel.
Besides, have you ever wondered why your home never feels as comfortable and efficient as it should? Of course, you know that your home should feel comfortable and efficient, but it never does.
Have you ever noticed that the thermostat in your home is old-fashioned? It’s probably a mercury thermometer! And if you’re not careful, this could be costing you money on heating and cooling bills.
So you should properly set your Braeburn thermostat. Read this guide a-z on making this switch today…
Important Notes
First, call a professional to install your thermostat. The cost of hiring a professional for this type of work is less than it would cost you in the long run. I know that some communities have started offering workshops on how to set your home’s thermostat properly.
These workshops tend to give you the basics of installing and using a thermostat. However, they don’t go into sufficient detail on everything else that needs to be done for your home to be as comfortable and energy-efficient as possible.
So, you should call a professional.
Note: The first thing you should do is check the gauge on your thermostat. This will be located near the bottom and should have a picture of a mercury thermometer on it.
If you see an image of a mercury thermometer, keep reading for some important information about this type of device.
What is a Mercury Thermometer?
A mercury thermometer is a type of thermometer that uses liquid mercury to measure temperature. Mercury thermometers are typically used in clinical and scientific settings to take precise measurements, as mercury has a very stable boiling point.
However, mercury thermometers are being phased out in many countries due to their environmental impact and the potential health risks associated with mercury exposure.
Alternative types of thermometers are now widely available. These include digital thermometers, which use electronic sensors to measure temperature, and infrared thermometers, which use light waves to measure the temperature of an object.
Steps to Set Braeburn Thermostat Yourself
Date/Time: The thermostat displays the current date and time in military format. You can change this. However, pressing the date/time button and down arrow, three times toggle between “am/pm” and “military time.” Depending on your preference should be easy to adjust it quickly.
Temperature: You can adjust the temperature of the Braeburn thermostat easily. Most of the model has a default setting is “72 degrees.” You can either keep this as it’s or adjust it to a different setting according to your preference.
Fan speed: The Fan button will allow you to switch between fan speeds if your heating and cooling system have this feature. If not, you won’t have to worry about changing anything.
Timer: The timer setting on this thermostat is easy. All you need to do is press the ‘Program’ button once, and the default time of 7.5 hours will appear. You can set it for less than this amount or more until you get the desired setting. Using this button, you can place an auto ON/OFF timer.
Preheat/Defrost: You’ll find this feature on some models. You’ll find this button near the top of your thermostat, and it is used to set extra heat before you leave or cool down a room before people enter during hot months. This is useful for preventing damage to electronics and furnishings in your home that extreme temperatures may cause.
Press this button once to set the timer for 1 hour. Then, press it again to extend that time until you get your desired setting. You can preheat or defrost for more or less than an hour as needed to prevent damage from occurring while you’re away.
Do not use the “preheat/defrost” feature when you’re at home.
Cancel/Off/Return: This button is used to cancel or return your settings so that you can start over if necessary or turn the unit off completely. If you’re done with the setup, for now, pressing this button will allow you to save your progress and complete it later as needed.
How Do I Reset a Braeburn Thermostat?
To reset your Braeburn thermostat, you’ll want to press and hold the “Program” button until you hear a beeping sound. Release this button when this happens, and wait for it to change from one countdown timer to another.
If the time changes again, repeat the same process of holding down the “Program” button to complete your reset.
If that doesn’t work:
Most likely, there’s been an interruption in power or some other event within your HVAC system that caused something not regular with your Braeburn thermostat’s settings.
To fix this, just follow these steps:
FAQs:
How to Find Your Thermostat Model Number?
A: Look for the model number on the bottom of the thermostat. Many, if not most, manufacturers use a universal standard to identify their models. This information is usually found stamped on the thermostat and looks something like this: M014A2008A or PT9-F212A011BX/U
Keep in mind that some manufacturers may have different ways of identifying their units depending on how advanced they are. This means it’s best to refer to your owner’s manual for more precise instructions if needed.
My Braeburn thermostat says F on it when it’s cold out, but I have my temperature turned to C. What’s happening?
A: This is likely a common issue that older Braeburn thermostats have. The company updated its products in recent years, so it’s possible your unit may not match up with the newer compatible models. To overcome this minor problem, simply update your outdated system by purchasing an upgraded thermostat from a trusted place like Amazon.
Where can I purchase new thermostat batteries?
A: Many hardware stores and large retailers carry AA-size batteries that you can use to replace your current ones. If you’re having trouble finding the right kind or model of battery for your thermostat, just contact the company’s customer service representatives for help.
My Braeburn thermostat isn’t turning on at all, and I’m not sure what to do. What should I do?
A: First, turn off your system by setting each one of its knobs or dials down to zero. Next, press the “Program” button to see the time or temperature. From here, push it another two times so that you can make any needed adjustments. Be sure to press “Program” again once you’ve changed all of your settings.
My Braeburn thermostat shows an error message whenever I turn on my air conditioner and heating unit. What should I do?
A: To avoid errors like this, you’ll want to make sure that you’re using the right kind of battery and thermostat model for your Braeburn device. If possible, try replacing the batteries with new ones instead of an old set that has been used before.
My Braeburn thermostat is difficult to program, and I don’t know how to change it. How can I fix this?
A: To solve this issue, you’ll want to refer to your owner’s manual for more specific instructions on adequately programming this type of HVAC device. Usually, newer Braeburn brand’s thermostats are more intuitive about how to program them, and all you have to do is look at the options on your screen that tell you what to press to change them.
In Conclusion
Braeburn is one of the most respected furnishing and home products manufacturers in recent years. Their thermostats are known for their quality, robust technology, and value.
If you’ve invested in an older thermostat that is difficult to program or has some other issues, then you may want to consider upgrading it. Fortunately, many new thermostats were built to be more advanced and convenient.
These newer models will be easier to use, and they’ll allow you to save energy whether you need to turn on your air conditioning or heat. However, if you’re having trouble getting your Braeburn thermostat to turn on, or if it simply has issues displaying information to you, then you should contact the retailer where you bought it or the manufacturing company.
