Installing a doorbell is an easy DIY project that you can easily do within a short time. Having the right size drill bit ensures you the product is installed correctly and securely.
When it comes to Ring video doorbells, what size drill bit should you use? Not to worry, here I’ll provide you with the right information about drill bit. So that you easily install your Ring doorbell.
I’ll discuss the different types of drill bits available, why the size of the bit is important, and how to choose the right size for your particular doorbell installation.
You will need a 15/64″ drill bit to properly mount your Ring Doorbell. In some kits, this size of bit is included, but it may not be able to drill through harder brick surfaces. So if your brick is difficult to drill, you can try a 7/32″ or 3/16″ bit for better results.
By the end of this post, you’ll have the knowledge to properly install your Ring doorbell with confidence.
Drill Bit That Comes With the Ring Doorbell
A 15/64-inch drill bit, or either a 5.5 mm or 6 mm drill bit is required to install a Ring Doorbell to the wall. You can also use a 7/32-inch(which is essentially the same size) drill bit to mount your doorbell. On top of that, you may either need a T6 or T15 screwdriver head.
Depending on the type of plugs or anchors included with your Ring doorbell kit, you may need a specific size drill bit. If your kit comes with pre-drilled plugs, all you need to do is use the appropriate drill bit to create holes for mounting the doorbell.
Note – Using a drill bit that is too large can damage the plugs and anchor screws. Conversely, if the drill bit is too small, the plugs and anchor screws may not stay secure.
To ensure of correct drill bit size, refer to the instructions included in your Ring doorbell kit. Alternatively, you can reach out to customer service at Ring for assistance.
What Tools Are Necessary If Your Ring Doorbell Does Not Include a Drill Bit?
Installing a doorbell can be a straightforward process. However, it is only possible when you have the right tools.
Here is a guide to help you make the right choice when your Ring doorbell doesn’t come with a drill bit –
|Screw Size||Pilot softwood||Pilot hardwood|
Quick Tip – When selecting a drill bit, make sure that it’s made from quality materials. Cheap drill bits may not be able to properly create the hole. Furthermore, a too-small bit might not be able to hold the plugs or anchors firmly enough, which might lead to an unstable installation.
Other Drill Bit Sizes That May Work
If you find a different size than what is provided in the kit, there are some other drill bit sizes that may work.
You can use a 6 mm drill bit to create the hole since that is closer to 5.95 mm or 15/64-inch. Additionally, you can use a 1/4-inch drill bit if a 6 mm is hard to find in your region.
Is it Better to Use a Hammer Drill for Installing a Ring Doorbell?
A hammer drill is always ideal for drilling on any surface. Specially, you can easily create holes in brick and concrete surfaces without damaging them.
Additionally, it provides more power than a regular drill machine. It allows you to complete the installation faster and with less effort.
Before the drilling, ensure you use the right size bit for your surface. Don’t forget to take enough time for completing each step.
In conclusion, when it comes to finding the right size drill bit for your Ring Doorbell, you should think about the size of the hole, the type of material you’re drilling into, and the screw size. The size and type of drill bit also depend on the type of wall you are drilling into.
However, a 15/64-inch drill bit is good for most of the model Ring doorbells. So with the right drill bit and the right installation procedure, you can ensure that your Doorbell is securely installed and ready to be used.
Mostly it depends on the model you would like to use. The Ring Doorbell Pro requires a minimum of 18 Gauge wire, which is equivalent to approximately 1.024mm in metric measurements. If you want to increase the wire size, it’s probably a good idea to do so.
If you don’t have a set, you can purchase a small-sized Allen wrench. You can use Torx 10 secure screwdriver or bit (usually 1/4″).